
•Thermoplastic pump housing
•Premium performance at water depths up to 25’
•Heavy-duty, dual-voltage 115/230V motor
•Self-priming after pump housing is initially filled
•30/50 pressure switch
•Preinstalled pressure gauge
Application | |
The shallow well jet pump can pump water where the water is located less than 25 feet vertically from the pump. | |
Voltage | 115/230 |
Hertz | 60 |
Phase | Single |
RPM | 3450RPM |
Motor type | Permanent Split Capacitor (PSC) |
Insulation | Class B |
Circuit requirments | 20/15 AMP |
Duty rating | Continuous* |
Shaft seal | Mechanical seal |
Motor Shaft | Stainless steel |
Upper motor bearing | Ball bearing |
Lower motor bearing | Ball bearing |
Cooling | Fan cooled |
Motor protection | Auto reset thermal overload protector |
Pump Specifications | |
Discharge size | 1" NPT |
Suction size | 1-1/4" NPT |
Pump Housing | Thermoplastic |
Pump Base | Thermoplastic |
Diffuser | Reinforced thermoplastic |
Impeller material | Reinforced thermoplastic |
Gasket | Rubber |
Solids handling | 0" spherical |
Liquid temp.range | 32-140°F |
Operation | Automatic |
Fasteners | Steel |
Automatic Switch Specifications | |
Type | Pressure Switch |
Switch on point | 30 PSI |
Switch off point | 50 PSI |
Material | Reinforced Thermoplastic |